Features:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the
other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand
tablet makes unusually loud noises, remove it, and use the included hex-wrench to
adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and
estimate: if the platform jumps more than 2mm, change the disk. After replacing
the disk, make sure to tighten the ring on the platform 8 (closest to the outside
of the sand tablet)
| Keywords |
Plaster Model Arch Trimmer |
| Color |
White |
| Package |
Carton Box |
Audited Supplier 
){kind=link}